SKC Inc Pocket Pump - Personal Air Sampling Pump

Pocket Pump® Series (20 to 225 ml/min)

Programmable, PC-compatible low flow sample pump with NiMH battery and optional Datatrac software. Twin port option with both suction and pressure ports for sorbent tube and bag sampling

  • Constant flows from 20 to 225 ml/min
    -Ideal for sorbent tube sampling
  • Programmability in a pump that fits into a shirt pocket
    - Easy three-button pump operation; no tools needed
    - Only 5 ounces (142 grams)!
    - 4.5 x 2.2 x 1.4 inches (11.4 x 5.6 x 3.6 cm)
  • Constant flow and constant pressure modes
    - For single-tube sampling and time-saving multiple-tube sampling
  • Twin port model available for bag sampling
  • 12-hour extended run time with NiMH battery
    - Continuous run with AC adapter for 24-hour sampling
  • PC programmable with DataTrac Software
    - Program delayed, intermittent, repeat, and/or multiple sampling schedules
    - Download sampling data to a PC for record keeping and data analysis
  •  Pump-controlled charging
    - Automatically senses maximum charge and switches to trickle charge to protect the battery
  •  Large easy-to-read LCD
    - Displays continuously updated sample volume calculations
    - Battery status always displayed
  • Intrinsically safe
  • Features maintain sample integrity
    - Automatic low battery and flow fault shut-off
    - Auto-restart after flow fault
    - Run time data stored in pump memory
    - Security code access
    - RFI/EMI shielded and CE marked
    - Impact-resistant case features sliding cover to protect keypad and interface port


Performance Profile
Flow Control Accuracy ± 5% of set-point in constant flow mode after calibration


Typical Run Time

12 hrs at 200 ml/min up to 10 inches water back pressure
Using charger with AC power:  Extended runtime
Charge Time ≤ 6 hrs with Pocket Pump charger (battery attached to pump); approximately 16 hrs with
charger (battery detached from pump)
Temperature Range Operating: 32 to 113 F (0 to 45 C)
Charging: 40 to 100 F (5 to 38 C)
Storage: -4 to 113 F (-20 to 45 C)
Flow Fault After 15 sec, pump goes into Hold, retains accumulated run time display, and displays fault icon. After 5 min, auto-restart is attempted every 5 min until fl ow is corrected or fault mode
is cancelled.
Timer 1 to 9999 min display ± 1% accuracy


  • Intrinsically safe
  • UL and cUL Listed
  • Model available that meets ATEX Directive 94/9/EC (NiCad battery model only)
  • Safe in hazardous locations
  • Versatile for all industries

Ask Quick Question